Menu

Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Viestit - upamfva

Sivuja: 1 ... 177 178 [179] 180 181 ... 183
2671
Muu Simpsonit-aiheinen / Micro-LED Displays From 2021 Onward Analyzed by IDTechEx
« : 20.07.21 - 09:12 »
Micro-LED Displays From 2021 Onward Analyzed by IDTechEx



From mobile phones, TVs, to cars and public screens, displays have become an important component in daily life to convey information. The importance of displays becomes more significant during COVID-19, as the demand to have a display for remote communication is higher. There is an emerging display type - Micro-LED display, which has the potential to become the next-generation mainstream, with its ability to be fabricated from tiny to huge sizes. The challenges and opportunities are discussed in the IDTechEx report "Micro-LED Displays 2021-2031: Technology, Commercialization, Opportunity, Market and Players".
COVID-19 has not stopped the development of Micro-LED displays. With CES and Display Week, as well as a number of events being put online, we can see the progress and new launches of Micro-LED display prototypes and products are not affected much.Get more news about Chainzone Led Display,you can vist our website!

The increasing number of activities from display suppliers can be seen from the highly cumulated investment and the increasing number of patent filings, as well as the prototypes/products brought in by Micro-LED vendors, such as AUO, PlayNitride, RiTdisplay, Samsung, LG, Sony, TCL, Tianma, Konka, Glo, Plessey, JBD, X-Display, VueReal, CSOT, Sharp, Kyocera; the list can go on.

However, prototypes to prove technology/science readiness with lab/fab scale production are very different from mass manufactured commercial products. The latter requires zero defects for consumer products. Although the science has been proved, there are more engineering and manufacturing issues. For instance, conventional LEDs can reach external quantum efficiencies (EQEs) to ~70%, while tiny Micro-LEDs less than 10 µm may struggle to reach 20%. Red LEDs are especially challenging with low EQEs and brittle features. Tiny Micro-LEDs have a large surface area, which may lead to more defects during the fabrication process. Therefore, solving engineering/manufacturing challenges is important, including die size miniaturization while maintaining high efficiency, chip design, and chip manufacturing technique improvement. Other issues include mass transfer yield & accuracy, defect repair, testing, uniformity, light management, color conversion, etc.
To fabricate a Micro-LED display, many technologies and processes are involved, such as epitaxy, photolithography, chip fabrication, substrate removal, inspection, mass transfer, bonding and interconnection, testing, repair, backplane and drive IC, etc. After years of development, some technology difficulties have been solved, while new challenges sit in front of us. For instance, several years ago, the major efforts were concentrated in die miniaturization, chip design. and mass transfer, etc. Recently, more and more players realize a complete understanding of all the processes is the key. Therefore, more people also put increasing efforts on technologies such as inspection, repair, driving, image improvement, light management, and high-volume production equipment.

Another interesting phenomenon is the increasing number of partnerships, mergers, acquisitions, joint ventures, and further investment. This aligns with the display cycle trend. There was hype in the Micro-LED display one or two years ago and now major players gradually find their roadmap. Mini-LED displays and large signage & TVs are approached by many vendors and players are still working on Micro-LED displays in the meantime. Compared to previous years, consolidation becomes more obvious.

2672
Muu Simpsonit-aiheinen / LOW VOLUME PLASTIC INJECTION MOLDING IS OUR SPECIALTY.
« : 20.07.21 - 08:57 »
LOW VOLUME PLASTIC INJECTION MOLDING IS OUR SPECIALTY.



At PTI, we believe that there’s an advantage and need for low volume molding; as not every product requires a high volume of plastic parts. In 1984, we structured our manufacturing operations to specialize in complex low (to high) volume plastic injection molding, and it remains the core of our business — delivering with the same precision and price advantages of a high volume production mold.Get more news about Low Volume Plastic Injection Molding,you can vist our website!

At PTI, our Low-Volume-Production (LVP) molding program offers the latest in injection-molding equipment, beginning with our prototype injection molding lab, which uses the latest in electric injection molding machines with closed-loop processing, and automated material handling systems.

Mold Cost: Low volume molds are generally cut from a high-quality grade of aluminum, which is easier to machine and modify than hardened steel.
New Product Launches: Requires only a modest investment, which enables the product to get to market quicker. Also, limits monetary loss if a product is not successful in the marketplace.
Technology: Low Volume tools may be more feasible if you anticipate a short product life.
Low Volume Requirement: Many times, only a few thousand parts are needed to meet the needs of the entire production run.

2673
Muu Simpsonit-aiheinen / E-commerce fruit and vegetable packaging machine 2020 hot sale product
« : 20.07.21 - 08:45 »
E-commerce fruit and vegetable packaging machine 2020 hot sale product



Because of the outbreak of the new coronavirus, e-commerce is becoming more and more important in life because of the inability to go out. Many people can buy what they want without leaving home. This year, vegetables, fruits, and meat can also be delivered to the door. Now, e-commerce fruits and vegetables are getting better and better, very convenient~Get more news about Fruit Packing Machine,you can vist our website!

The preservation of fruits and vegetables starts with the picking of fruits and vegetables. Product grading is based on the classification of different varieties of fruits and vegetables according to the size, weight and appearance of fruits and vegetables, so that the quality of the products can be distinguished and the basis for their commerciality and price can be provided. . The grade standard can not only meet the diverse needs of consumers, but also provide the basis for delivery for e-commerce enterprises, consumers, and producers, thereby solving the asymmetry in the quality information of fruits and vegetables among e-commerce enterprises, consumers, and producers. Prone to disputes.

After grading, the fruits and vegetables should be packed in a packaging process. On the basis of the optimization of the existing packaging of fruits and vegetables and the packaging that may be used on fruits and vegetables, a packaging method suitable for e-commerce is proposed to meet the needs of self-distribution, third-party logistics and brand Different requirements. Common packaging methods include bag packaging and tray packaging. After the fruits and vegetables are packaged, they can overcome the problems of insufficient packaging strength, high product breakage rate and increased packaging and distribution costs.

　　Following the cold chain transportation of fruits and vegetables, the fruits and vegetables are kept fresh during the distribution process and home storage, which standardizes the freshness operation methods, maintains quality, and reduces the loss rate.

Foshan Xinkeli Machinery products optimize the packaging methods of fruits and vegetables and introduce packaging technologies suitable for e-commerce. KL-T600X and KL-450D two e-commerce premium fruit and vegetable packaging machines can realize automatic packaging for bulk vegetables and vegetables with trays, which can effectively solve E-commerce packaging strength to ensure the quality of fruits and vegetables.

2674
Muu Simpsonit-aiheinen / Most aerosol droplets in dental procedures from irrigation tools
« : 20.07.21 - 08:34 »
Most aerosol droplets in dental procedures from irrigation tools



Patient saliva was found not to be the major source of the microbes in aerosols generated during dental procedures, according to Ohio State University researchers, who analyzed the genetic makeup of the organisms detected in aerosols.Get more news about Dental Instruments,you can vist our website!
   
The findings, published May 12 in the Journal of Dental Research, is the latest study to demonstrate that visiting the dentist remains safe, with low risk for transmission of the SARS-CoV-2 virus. SARS-CoV-2 spreads mainly through respiratory droplets, and dental procedures are known to produce an abundance of aerosols, which led to fears that saliva during a cleaning or a restorative procedure could make the dentist's chair a high-risk location.
   
“These findings should help us open up our practices, make ourselves feel safe about our environment and, for patients, get their oral and dental problems treated,” said lead author Purnima Kumar, D.D.S., Ph.D., professor of periodontology at Ohio State, in a news release.

“Getting your teeth cleaned does not increase your risk of COVID-19 infection any more than drinking a glass of water from the dentist’s office does,” added Dr. Kumar, a member of the ADA Council on Scientific Affairs.
   
The researchers set out to characterize the microorganisms generated during dental procedures to quantify the contribution from saliva by collecting samples from personnel, equipment and other surfaces reached by aerosols during a variety of dental procedures.
   
What they found was that no matter the procedure or where the condensate had landed, microbes from irrigants contributed to about 78% of the organisms in aerosols while saliva, if present, accounted for 0.1% to 1.2% of the microbes distributed around the room.
   
For the study, the team enrolled 28 patients receiving dental implants, restorations using high-speed drills, or ultrasonic scaling procedures in Ohio State's College of Dentistry between May 4 and July 10, 2020. Researchers collected samples of saliva and irrigant (the water-based cleaning solutions used to flush out the mouth) before each procedure and, 30 minutes after the procedure, aerosol remnants — condensate — from providers' face shields, the patient's bib and an area 6 feet away from the chair.
   
Salivary bacteria were detected in condensate from only eight cases and of those, five patients had not used a pre-procedural mouth rinse. The SARS-CoV-2 virus was identified in the saliva of 19 patients, but was undetectable in aerosols in any of the cases.
   
The findings make sense, Dr. Kumar said: Irrigant dilutes saliva — a "thick, viscous" substance — by an estimated 20- to 200-fold. These findings help to explain the outcome reported in the 2020 Journal of the American Dental Association study that less than 1% COVID-19 positivity rate among dentists.

"Dental surgeons and hygienists are always at the forefront of the war against bacteria in the mouth, and they of course did not feel safe because they are front-line workers surrounded by aerosol," said Dr. Kumar, who has a periodontology practice of her own and was one of the procedure operators in the study.

Hopefully this will set patients’ minds at ease because when you do procedures, it is the water from the ultrasonic equipment that's the primary source of aerosols rather than saliva, making the risk of spreading SARS-CoV-2 infection not high, she said.

2675
Muu Simpsonit-aiheinen / Hidrocor Avela vs Hidrocor Ochre
« : 20.07.21 - 08:09 »
Hidrocor Avela vs Hidrocor Ochre



You’re looking for the perfect brown colored contact lens, and you already know that Hidrocor lenses are the most natural-looking lenses in the world, but now to pick the shade. Hidrocor Ochre and Hidrocor Avela are both beautifully natural brown colors, but trying to decide between the two can be tricky.To get more news about Hidrocor, you can visit beauon.com official website.

The end color result of these lenses will always depend on your natural eye color, but we have put together a few pointers on choosing between the two based on our customer's feedback.

On very dark eyes, Hidrocor Ochre can sometimes appear a slight bit grayer than Avela as it is a lighter color. If you’re after a slightly bolder look, then Ochre is the color for you.
If you have dark eyes and want to enhance them naturally, we recommend both the Hidrocor Avela and the Hidrocor Ochre Contact Lens.
The beautiful orangey, hazelnut color will blend beautifully well with your natural eye color.

Conclusion
Both colors in the Hidrocor collection doesn’t feature a limbal ring and therefore offer an extremely natural finish. In general, Ochre is lighter than Avela, while Avela offers more of a Hazlenut color. Both shades are perfect for dark eyes!


2676
Muu Simpsonit-aiheinen / Colored contact lenses: Products, safety, and more
« : 20.07.21 - 06:39 »
Colored contact lenses: Products, safety, and more


Contact lenses are a popular and convenient way for many people to correct their vision. Several online manufacturers offer vision correcting and non-correcting contact lenses.To get more news about COLORED CONTACT, you can visit beauon.com official website.

Approximately 45 millionTrusted Source people in the United States wear contact lenses. Many people wear them to correct their vision, and others select colored contact lenses to change the appearance of their eyes.

This article discusses colored contact lenses, what types are available to purchase, how safe they are, and why eyewear is important for vision health.By law, all contact lenses, including colored ones, require a prescriptionTrusted Source, whether they correct vision or not.

Manufacturers may call colored contact lenses cosmetic, theatrical, Halloween, circle, decorative, or costume lenses.Colored contact lenses may help correct a person’s vision or have a cosmetic purpose, changing the color of the eyes.

People may choose to purchase colored contact lenses with a natural look, opt for lenses with very bright, striking colors, or select lenses to suit different outfits and styles.Once a person has a prescription, they can purchase colored contacts from reputable online eyewear companies.

While it is possible to buy colored contact lenses from costume shops, beauty salons, drug stores, and other places that do not require a prescription, they are not legal and present a threat to eye health.

A 2019 study on teenagers in Texas who regularly wore colored contact lenses found that only 3.9%Trusted Source of respondents purchased their lenses from an eye doctor. Half of the respondents did not have a prescription for contact lenses.Transparent-tinted lenses: These uniform-colored lenses can change the color of the iris.
Computer-generated opaque contacts: Opaque lenses cover up an individual’s natural eye color. They are available in a single color or blended colors that can mimic natural iris colors. They feature different patterns, colors, and pupil sizes on the lens surface.
Hand-painted custom contacts: These lenses can closely match an individual’s natural eye color and help cover any injuries. These contact lenses tend to be more expensive to purchase.A person may want colored contact lenses for several reasons, including changing their eye color to suit their personal style or match an outfit or costume.

Colored contact lenses also have medical uses. People who have eye injuries or scarsTrusted Source, such as a ruptured iris or an irregular pupil, may use colored contact lenses.Some evidence shows that colored contact lenses can help people who have dyschromatopsia, or color blindness.

2677
Muu Simpsonit-aiheinen / World of Warcraft: Burning Crusade Classic will arrive on 1 June
« : 20.07.21 - 05:54 »
World of Warcraft: Burning Crusade Classic will arrive on 1 June



On 1 June 2021, World of Warcraft Classic players will witness the arrival of 2007’s Burning Crusade expansion... again. Illidan Stormrage will once more invite everyone over for a confrontation in the shattered realm of Outland where many dangers await players, and just as much loot. To get more news about classic gold buying, you can visit lootwowgold official website.

World of Warcraft: Burning Crusade Classic is Blizzard Entertainment’s loyal recreation of the very first World of Warcraft expansion which sent players back through the Dark Portal to the shattered realm of Outland—a distant, fel-scarred planet where the forces of the demonic Burning Legion prepared to mount an assault against all life on Azeroth. The expansion brings a ton of new content for Classic players, including two new playable races (blood elves and draenei) and flying mounts in Outland.

A lot of players might want to keep the purity of their pre-Burning Crusade realms intact before this expansion arrives, but Blizzard has them covered. When the pre-expansion patch launches on 18 May, Classic players can choose to either progress their characters into Burning Crusade alongside the rest of their realm or continue playing through Classic content on brand-new Classic Era realms launching that day.

Essentially: you get to choose between staying in Classic, or moving onto Burning Crusade. If you’d like to dip your toes in both, you can clone your characters for US$35 per character. That lets you play a copy of your character on a Classic Era realm, while moving the original into Burning Crusade. On 18 May, you’ll also get to create blood elf and draenei characters and experience their new starting zones (Azuremyst Isles and Eversong Woods) in advance of the expansion’s arrival. The patch also adds a limited-time game event where demonic agents from the Dark Portal assault key locations across Azeroth.
The Shattered Realm of Outland: Traverse the treacherous crags and spires of Blade’s Edge Mountains, where even dragons fear to roam; hunt alongside the uncorrupted Mag’har orcs among the floating islands of Nagrand; battle demonic agents of the Legion in the shadow of the Black Temple; and much more.

Two New Playable Races: Fight for the Horde as the blood elves, seeking a new source of the arcane power that once sustained them, or join the Alliance as the draenei, exiles from Outland in search of a new home.

Gather at the Arena Gates: Assemble your most trusted allies and prove your PvP prowess in 2v2, 3v3, or 5v5 combat in Arenas such as the Ring of Trials and the Circle of Blood.

Take Wing on Flying Mounts: Take flight in the chaotic skies of Netherstorm and soar over fel-touched Shadowmoon Valley with the introduction of flying mounts in Outland.

Master Challenging Raids and Dungeons: Conquer 5-player dungeons set in the crystalline fortress of Tempest Keep and the Caverns of Time, where heroes bear witness to Azeroth’s past. Raid the haunted halls of 10-player Karazhan, and gear up over time for a climactic confrontation against Kil’jaeden in 25-player Sunwell Plateau.

New Options for Heroes: Carve gems of power to socket into players’ gear with the Jewelcrafting profession; choose between the Aldor or Scryer factions in Shattrath and earn their unique rewards; create a paladin on the Horde or a shaman on the Alliance; and more.

2678
Muu Simpsonit-aiheinen / World of Warcraft: The Burning Crusade Classic Release Date Leaked
« : 20.07.21 - 05:37 »
World of Warcraft: The Burning Crusade Classic Release Date Leaked



Gamers who have been watching Blizzard news on the Battle.Net platform had a surreal experience when the publisher hinted at a released date for World of Warcraft: The Burning Crusade Classic. It was picked up by fans in the Blizzard forums, but the announcement was quickly removed. Still, the evidence is roaming the internet with screenshots to prove it.To get more news about buy wow items, you can visit lootwowgold official website.

Blizzard has been hard at work remastering several of their classic games. At BlizzConline, the publisher mentioned the WoW: TBC release for 2021, but no official date was cast in stone. However, the leak seems to indicate that we’re looking at a launch date of June 1, 2021.There has been some controversy over the remastered classic game, especially when Blizzard announced it would include a Cash Shop. You could also acquire mounts, which was a rare commodity in the original title that represented a player’s status. Some fans welcomed this modern approach, while others were dissatisfied and wanted the publisher to remain true to the classic version.

Whatever their feelings, we’re all excited to see World of Warcraft: The Burning Crusade Classic appear. Since June 1 is right around the corner, we’re hoping to see an official announcement from Blizzard soon. Well, one that actually stays around long enough to enjoy it.

2679
Muu Simpsonit-aiheinen / Hospital face masks recalled in France due to potential toxic risk
« : 20.07.21 - 05:20 »
Hospital face masks recalled in France due to potential toxic risk



At least 16.9 million of the masks were distributed for use in hospitals and pharmacies in 2020. They are rated FFP2, contain ‘biomass graphene’, and were manufactured by a Chinese company
At least 60.5 million face masks rated as FFP2 and distributed to health workers should no longer be worn to protect against Covid, as inhaling their particles could be toxic for the lungs, health authority Santé publique France (SPF) has said.To get more news about surgical mask supplier, you can visit tnkme.com official website.

The masks, rated FFP2, contain “biomass graphene”, and should no longer be worn as they can cause respiratory issues, the authority said. The masks are being recalled from use. They had been distributed for use in hospitals, pharmacies and other medical centres and situations.

Regional health authorities have sent hospitals a letter that reads: "At this stage, 60.5 million CE marked FFP2 masks have been identified as potentially containing graphene, of which 16.9 million were distributed in 2020.”

SPF said: “[People should] stop using FFP2 masks labelled ‘Biomass Graphene’ [due to a] possible risk linked to the presence of graphene in these masks.”

Biomass graphene is a material widely used in electronics due to its resistance and conductivity. The recalled set of masks were part of a state stock, and had been provided to France by the Chinese manufacturer Shandong Shengquan New Materials (model SNN 200647), said online news site Mediapart.

When contacted by Mediapart, SPF said that the order dated back to April 2020, when face masks were being bulk ordered “during the face mask shortage”.

SPF added that the Chinese manufacturer had nowhere mentioned the “biocidal activity” present in their products (although “Biomass Graphene” was listed). If it had, the masks would not have been bought, SPF said.

It was not clear that the material had a toxic effect on the respiratory system until later, SPF said.

The warning in France comes two months after Canada warned of the same issue, and took certain models of masks off shelves.

At the start of April, the Canadian health ministry “advised Canadians to not wear masks containing graphene, as they could inhale graphene particles, which can be dangerous for health”.

It said: “Preliminary analysis of the available studies...has revealed that the inhalation of graphene particles may cause early lung toxicity in animals. We do not yet know the potential risks of inhalation of these particles from masks to humans, nor the risks to health that may exist.”

2680
Muu Simpsonit-aiheinen / What face mask for what use in the context of the COVID-19 pandemic?
« : 20.07.21 - 05:07 »
What face mask for what use in the context of the COVID-19 pandemic?


In the context of the COVID-19 pandemic, wearing a face mask has become usual and ubiquitous, in both hospitals and community. However, the general public is consuming surgical or filtering facepiece (FFP) masks irrespective of their specificity, leading to a global supply shortage for the most exposed persons, who are healthcare workers. This underlines the urgent need to clarify the indications of the different categories of mask, in order to rationalize their use. This article specifies the French position for the rational use of respiratory protective equipment for healthcare workers.To get more news about medical mask company, you can visit tnkme.com official website.

In the context of the coronavirus disease 2019 (COVID-19) pandemic, healthcare workers' (HCWs) protection from contamination is based on the wearing of personal protective equipment (PPE) [1,2]. Transmission routes of severe acute respiratory syndrome coronavirus (SARS-CoV-2) include direct transmission (droplet, e.g. cough, sneeze) and contact transmission (contact with oral, nasal, and eye mucous membranes). The presence of SARS-CoV-2 in the environment of COVID-19 patients therefore reinforces the belief that fomites play a role in transmission of SARS-CoV-2; however, the relative importance of this route of transmission compared to direct exposure to respiratory droplets is still unclear. The wearing of face masks has become usual and ubiquitous, not only in hospitals but also in the community [3]. Without necessarily needing them, the general public is over-consuming surgical and filtering facepiece (FFP) masks irrespective of their specificity [4,5]. This may lead to supply shortages for HCWs in the frontline of patient care, as already reported in several countries [5]. In order to rationalize the use of masks and to prevent their shortage, we present the French guidelines on the indications for the use of anti-projection or surgical masks and FFP masks.

The rational use of face masks is reinforced by the World Health Organization (WHO) update published on February 19th, 2020, which specifies indications for wearing masks as follows: in the context of stage 3 of an epidemic (active circulation of the virus) and during a period of difficulty in supplying masks, or even a shortage of masks, a prioritization of the distribution of respiratory masks (surgical masks in particular) may be envisaged in order to prioritize the protection of health professionals and other personnel, ensuring the continuity of patient care in health and social care facilities and in cities [1]. As defined in the ‘influenza pandemic’ plan by the European Centre for Disease Prevention and Control, this rationalization of mask distribution and use requires:

In France, the anti-projection mask or surgical mask is a medical device with an official EN 14683 standard description of ‘a medical face mask’ (Table I ). It is indicated for the protection of the wearer's environment, as it is intended to avoid, when the wearer exhales, the projection of secretions from the upper airways or saliva that may contain infectious agents transmissible by ‘droplet’ or ‘air’ routes. A surgical mask is designed for a single use only. It should be changed as soon as it becomes wet and at least every 4 h at the most, taking into account the conditions of use and integrity. Surgical masks must bear on their packaging: the CE (Conformité Européene) marking, the dated reference of standard EN 14683, and the type of mask (type I, II, or IIR). This last information characterizes the performances of bacterial filtration, differential pressure, and resistance pressure to splash, according to EN 14683, the last being required only for IIR masks. A medical face mask with an appropriate microbial barrier can also be effective in reducing the emission of infective agents from the nose and mouth of an asymptomatic carrier or a patient with clinical symptoms.

2681
Muu Simpsonit-aiheinen / What is the efficacy of standard face masks
« : 20.07.21 - 04:53 »
What is the efficacy of standard face masks


DISCLAIMER: This review was produced at speed in the early weeks of the pandemic. It was based on past research on other diseases, and did not include studies in Covid-19. It has been superseded by other, more extensive reviews which do include studies of Covid-19. There are no plans to update this review.To get more news about surgical mask stock, you can visit tnkme.com official website.

Most real-world research comparing standard face masks with respirator masks has been in the context of influenza or other relatively benign respiratory conditions and based in hospitals. There are no published head-to-head trials of these interventions in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, COVID-19, and no trials in primary or community care settings. Current guidance is therefore based partly on indirect evidence – notably, from past influenza, SARS and MERS outbreaks – as well as expert opinion and custom and practice.

Policy guidance from various bodies (e.g. Public Health England, WHO) emphasises the need to assess the contagion risk of an encounter and use the recommended combination of equipment for that situation. A respirator mask and other highly effective PPE (eye protection, gloves, long-sleeved gown, used with good donning/doffing technique) are needed to protect against small airborne particles in aerosol-generating procedures (AGPs) such as intubation. For non-AGPs, there is no evidence that respirator masks add value over standard masks when both are used with recommended wider PPE measures.

A recent meta-analysis of standard v respirator (N95 or FFP) masks by the Chinese Cochrane Centre included six RCTs with a total of 9171 participants with influenza-like illnesses (including pandemic strains, seasonal influenza A or B viruses and zoonotic viruses such as avian or swine influenza). There were no statistically significant differences in their efficacy in preventing laboratory-confirmed influenza, laboratory-confirmed respiratory viral infections, laboratory-confirmed respiratory infection and influenza-like illness, but respirators appeared to protect against bacterial colonization.

CONTEXT
Concerns have been raised about the limited personal protective equipment (PPE) provided for UK primary and community care staff with some GP surgeries, pharmacies and care homes having very limited provision. We were asked to find out whether and in what circumstances standard masks are putting healthcare workers at risk of contagion compared to respirator masks. A separate review (ongoing) looks at other aspects of PPE.

BACKGROUND
COVID-19 is spread by four means: contact (direct or via a fomite); droplet infection (droplets from the respiratory tract of an infected individual during coughing or sneezing are transmitted onto a mucosal surface or conjunctiva of a susceptible individual or environmental surfaces); airborne (transmission of infectious agents in small airborne particles, particularly during procedures such as intubation); and faeco-oral.1 2  Coughing and sneezing can generate aerosol particles as well as droplets.

This review considers respiratory protective measures e.g. use of face masks as PPE, to reduce droplet and airborne spread.  It should be noted that in one recent laboratory study, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2, the virus that causes COVID-19) survived airborne as long as SARS COV-1 (the virus that causes SARS) when artificially aerosolised and persisted longer on some surfaces.3 This finding is relevant because it suggests that deposited particulates may become resuspended i.e. airborne, when disturbed.

2682
Muu Simpsonit-aiheinen / Moonlight Collections Sterling Silver Custom Name Necklace Cheyenne Personalized
« : 20.07.21 - 04:39 »
Moonlight Collections Sterling Silver Custom Name Necklace Cheyenne Personalized Necklace



Custom name necklace Cheyenne is handpolished to a shiny finish; colors available in sterling silver, 10k rose gold, or 24K gold platedTo get more news about personalized photo necklace, you can visit koalaprint.com official website.
This meaningful Cheyenne personalized necklace makes a thoughtful gift for your wife, girlfriend, and your loved one for Christmas, Valentine's Day, birthdays
Custom necklace Cheyenne is packaged in a gift box ready for giving
Cheyenne name necklace personalized is made of 925 silver with the proper care sterling silver can last a lifetime
Click on the Customize button and enter your name and favorite color and Add to Cart (Max: 10 letters)
Cheyenne Gift For Dad Necklace is handmade in studio in Los Angeles, CA. Each Cheyenne Necklace is cut with precision using the state of the art machine and hand polished and buffed to perfection.
Personalized Necklace
Every moment you spend with a special person in your life is a moment to remember. Give a gift with a personal touch. From birthdays and anniversaries to holiday gifts, is where you find special gifts for the people you�re celebrating.

 HOW TO ORDER:Please click CUSTOMIZE NOW - Please upload image on the front and click back surface to Add Text;Tips: Please upload a clear picture to ensure that the photo is clear when you customize it.Treat yourself or someone special to this unique necklace;Free Engraving name necklace
Gold Heart Necklace Size:1.22" inch X 1.34" inches ( 31mm X 34mm);Full Length Size:45cm(17.7")+5cm(1.97")- Best custom necklace gift for Christmas , Valentine's Day , Mothers' Day, Fathers' Day ,Birthday ,Graduation and other occasions;
High Environmental Material Steel:Non-Allergy; High Quality Polishing, Good for Health; Smooth Finished;Exquisite workmanshipBoth-Side Polishing ---surface bright as a Mirror;No Easy to Fade Color--Silver-Forever color guarantee;Perfect custom jewelry of made stainless steel

2683
Muu Simpsonit-aiheinen / Why a personalized piece of jewelry from MyLittleNecklace is THE gift!
« : 20.07.21 - 04:24 »
Why a personalized piece of jewelry from MyLittleNecklace is THE gift!



No matter what the occasion is, finding the perfect gift can be difficult. Luckily, we can help you create the perfect gift while saving you the headache of trying to find the perfect thing.To get more news about Custom name bracelet, you can visit koalaprint.com official website.

Attention to Detail

When you give a personalized gift like a personalized necklace, the person receiving it will love it because you created it. The fact that you took the time to create this gift shows you care and that you're creative!

Just because it’s customized doesn’t mean it’s unaffordable.

MyLittleNecklace personalized necklaces are made of gold plated stainless steel, but they never cost more than $35 with a promotional code! It’s a high-quality gift for a great price!

How personalized do you want your gift to be?
 
Personalization is pretty important. For example, luxury jewelry like My Little Necklace pieces allows customers to choose a name (even with accent marks!) and the color of the necklace.

The best personalized jewelry choice

This could be the hardest choice to make! Between personalized necklaces, engraved rings, engraved name necklaces, etc. there are plenty of options to choose from depending on the person’s tastes and preferences.
How is personalized jewelry created?

Creating jewelry is a complex process. In fact, personalization is so popular that companies run out of stock quickly! For each, My Little Necklace piece, manufacturing your gift can take up to 5 business days.. Like all quality jewelry, the manufacturing process is followed by a certification process. Each certification according to European regulations takes 48 hours.

2684
Muu Simpsonit-aiheinen / Personalized gifts you can still get in time for Father’s Day
« : 20.07.21 - 03:56 »
Personalized gifts you can still get in time for Father’s Day


 Technavio has been monitoring the Personalized Gifts Market in the US and it is expected to reach a value of USD 2.01 billion, at a CAGR of 5.83% during 2021-2025. This research study helps in a deep understanding of the underlying forces driving the market growth and targeting current and potential customers across segmentations.To get more news about personalized gifts, you can visit koalaprint.com official website.
According to our comprehensive survey, the need to improve business efficiency is projected to significantly support market growth during the forecast period.The Technavio report analyzes the business impact of COVID-19 spreads, and the Personalized Gifts Market in the US is expected to have a direct impact due to the spread.  In the short term, the market demand will show Superior growth due to the increase in infections and reduced economic activity.

The Personalized Gifts Market in the US provides detailed information on key trends and drivers that is the essence of business planning and strengthening marketing strategies across regions and segmentations.

One of the key factors impeding personalized gifts market growth in the US is the seasonal nature of product demand. The increasing demand for seasonal decorations contributes to the increased sale of personalized gifts during special occasions and seasons.Personalized Gifts Market in the US has been prepared based on in-depth market analysis from industry experts. The report covers the competitive landscape, market landscape, market segmentation type, five forces analysis, marketing size, vendors, the market size by application, vendor analysis, and geographical landscape.

2685
Jaksot – yleinen keskustelu / UAE to Develop Its Own Cryptocurrency
« : 19.07.21 - 15:54 »
UAE to Develop Its Own Cryptocurrency



The United Arab Emirates has joined the growing ranks of countries that are working on their own digital currencies.To get more news about Blockchain Exchange, you can visit wikibit.com official website.
　　The UAE's central bank announced Monday that developing a cryptocurrency is one of seven objectives included in its 2023-2026 strategy, Emirates News Agency reports.
　　Aside from its pivot to crypto, it will also adopt other bleeding-edge technologies, such as big data and artificial intelligence.
　　The effort is meant to bolster the UAE's global standing, with the country's central bank aiming to enter the top 10.
　　In February, the UAE joined forces with China to work on the m-CBDC initiative. Its aim is to develop a proof-of-concept prototype for exploring uses of central bank digital currencies and distributed ledger technology.
　　Prior to that, the UAE had been testing blockchain-based digital currencies in collaboration with Saudi Arabia as part of Project Aber.
　　A global CBDC race
　　China, Sweden and some small island nations are thus far leading the CBDC race.
　　As reported by U.Today, Vietnamese Prime Minister Pham Minh urged the central bank to pilot a digital currency project earlier this month.
　　The U.S. and EU are moving toward digital money—though not at a rapid pace. The Federal Reserve is expected to release a CBDC-focused research paper this summer. In March, European Central Bank President Christine Lagarde said that a digital euro could launch in the middle of the 2020s.
　　When it comes to the MENA region, smaller countries are likely to follow the UAE's example.

Sivuja: 1 ... 177 178 [179] 180 181 ... 183