Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Viestit - upamfva

Sivuja: 1 ... 180 181 [182] 183 184
2716
HYDROFORMING VS. RUBBER PAD FORMING



Hydroforming and rubber pad forming (RPF) are two significantly popular methods of metal forming. The two processes vary in product finish, capabilities, pricing and production rate.Get more news about Rubber Forming,you can vist our website!

HYDROFORMING
Hydroforming is the process of exerting high pressure on a metal blank placed over a steel forming tool to define and form the desired shape of the  blank. A variety of metals can be formed through the process of hydroforming, including aluminum, brass, carbon and stainless steel, copper and alloys. The process accepts both thin and thick blanks. The use of high and evenly distributed pressure reduces the risk of surface scratches and wrinkles on metal parts formed. The ability to create a high-quality product with only one tool or die (not a matched set as in stamping) reduces the cost of labor and materials. The set-up is built to last for many production runs over time.
Rubber pad forming is accomplished on a hydroform or other hydraulic machine.  High pressure is exerted on rubber pads which in turn exert high pressure on a metal blank, which then forms to the shape of its forming box. Unlike hydroforming, rubber pad forming is limited to the forming of thin materials, primarily aluminum and thin specialty materials. The forming tool or box is made from relatively inexpensive resin board, aluminum, or plastic. Wrinkles can result. This type of metal forming is most useful for shallow parts that need moderately simple forming.  Production for this process is slower than other metal forming processes. The set-up is not built to last for many runs over time.

Ultimately, hydroforming and rubber pad forming both offer advantages, depending on  the thickness of the material, shape of the part, and cost considerations. Jones Metal Products offers both and has been perfecting our hydroforming processes for over 50 years. Our experts perform precision forming, laser cutting and finishing while working hard to advance our processes and save customers money. If you have a hydroforming project, call JMP at 888-868-6535 to talk about how you can save money and boost quality of your metal products. Ready for a quote? Send your drawing to us today.

2717
CAUSES AND PREVENTIVE TREATMENT OF EFFLORESCENCE IN CLAY BRICK TILES



The clay brick tiles that have emerged in recent years are loved by most builders for their strong texture and elegant appearance. However, buildings that use clay brick tiles as exterior wall tiles are more prone to the phenomenon of white efflorescence on the brick surface than buildings that use ordinary glazed tiles, which is collectively referred to as “efflorescence”, which directly affects the appearance of the building’s facade.Get more news about Terracotta Wall Panels,you can vist our website!

clay brick tiles are generally made of various pottery clays and other ceramic raw materials, which are vacuum-extruded to form a hollow body that connects two bricks into a whole, and is fired after drying. Because it is double-layered when it is formed, it can be separated into two pieces after being fired or at the joint of the front ribs, and it can be separated into two pieces, so it is called clay brick tiles, also known as clay brick tiles and double brick. The clay brick tiles has a soft color and a stable appearance. The surface can be smooth or rough. It can provide strong concave and convex lines. It can also be assembled into different patterns of art decoration effects. It has an obvious three-dimensional effect. It is a new type of exterior wall decoration material. It is widely used in buildings, squares, passages, parking lots, subways and other places. Compared with the current colored glazed bricks, glazed bricks and unglazed bricks used for architectural decoration, the clay brick tiles have a dovetail groove on the back of the bricks, and the sticking is firm and will not fall off. At the same time, the products are completely fired from natural raw materials, with high strength and acid resistance. Alkali, non-slip, anti-corrosion, and air permeability. Poorly paving the clay brick tiles will easily cause the whitening of the brick surface, which is collectively referred to as “efflorescence.” Once this phenomenon occurs, you must first understand the true reasons for splitting the bricks and paving the efflorescence. Targeted treatment and prevention.
Reasons and principles of efflorescence due to poor clay brick tiles paving: construction material reasons: wall base plastering layer contains higher free alkali content; binders and jointing agents contain higher free alkali content; construction technology Reason: When paving, the adhesive filling rate on the back of the clay brick tilesis insufficient, forming a cavity; the joints are not full, causing cracks, and causing rainwater to seep. The principle of efflorescence: due to the above-mentioned reasons of insufficient base layer, bonding material, jointing material and paving joints, after rainwater enters the back of the brick or the gap, it will produce free alkali in the bonding material and jointing material. The physicochemical reaction produces white flowers, which permeate through the cracks or brick surfaces of the bricks to form efflorescence.
The methods to effectively prevent efflorescence after splitting the tiles are as follows: dry the base layer and spray the impermeable material first; choose low-alkalinity adhesives and jointing agents; during the construction process, the adhesive paving is full , Jointing is dense; after paving, the jointing should be completed after the adhesive is fully cured, generally not less than 48 hours, which is more than 7 days; avoid construction in rainy days, especially avoid jointing in rainy days.
The treatment method of clay brick tiles that have produced efflorescence is: on sunny days, clean the brick surface with oxalic acid and rinse with water; after the brick surface of the clay brick tilesis air-dried, spray a layer of colorless and transparent anti-seepage agent to protect the outside world. The water cannot enter the back of the clay brick tiles or grooves to prevent the production of efflorescence: water. (Because the air humidity is high in rainy days, it is not suitable to operate in rainy days); after spraying the anti-seepage agent, the brick surface effect of the clay brick tiles will not be affected.

2718
Where is the noise of the vortex blower mainly from?


After the vortex fan is turned on, the noise will follow, so where is the big sound coming from?Get more news about Vortex Centrifugal Fan,you can vist our website!

No matter what kind of equipment, as long as it is not in a static state, the work is inevitable, and the sound is inevitable, but the sound is different, and it is different.

For our fan products, the main sound comes from air flow noise and mechanical motion noise. Baidu Encyclopedia entry, also given to explain, the above is said:

Where is the noise of the vortex fan mainly from?
The noise generated during the flow of gas is mainly due to the unsteady flow of the gas, that is, the turbulence of the gas flow, the noise generated by the interaction between the gas and the gas, and between the gas and the object.

The characteristics of airflow noise are also related to factors such as the pressure and flow rate of the airflow. Common airflow noise such as fan noise, jet engine noise, high-pressure boiler venting exhaust noise, etc., please search for Baidu.

Where is the noise of the vortex fan mainly from?
It includes the noise of the fan bearing, the sound of the motor running, the wave noise caused by the rotor, etc. In addition, the pipe components connected to the fan, such as the deflector, elbow, reducer, etc., are unreasonably arranged. Produces noise. This type of sound is different from aerodynamic noise.

From the mechanism of noise generation, it mainly consists of rotating noise and eddy current noise.Knowing the principle and root cause of noise, then, for noise reduction, you know where to start.

For the mechanical noise has been optimized in the early stage, then for the air flow noise, the silencer can only be installed on the external equipment, which is the stainless steel silencer we usually use.

2719
Do 'fragile' labels protect your packages?



Pictures of crunched and battered packages are not what you want to see, especially on your doorstep. When the photos are coupled with a 'fragile' label, that's even more confusing. Are we taking it for granted that labeling a package as 'fragile' can protect it? Get more news about Fragile Paper Label,you can vist our website!

In the height of a busy shipping and return season, we turned to Allen Kim at Edwin Jarvis to verify.

“A lot of times people prefer to use stickers because they are more visible but writing [fragile] does make an effect,” Kim said. But according to Kim, there’s a limit to a label’s effectiveness. For instance, factors like reusing a box could diminish the message.

“Your expectation of that effectiveness should be lower than if you're using a new box with no labels on it and the word ‘fragile’ really stands out,’ Kim said. 

Despite the packing box and label, Kim said other factors come into play when it comes to keeping your package secure.What it boils down to is whether there's a lot of automation that goes into your package or whether it's hand handled,” Kim said. “Different shippers have different levels of automation,” he explained. 

The VERIFY team checked in with UPS, the United States Postal Service and FedEx to learn more about each carrier’s policy for fragile packages and whether a label serves as an alert for special handling.

According to a spokesperson for UPS, the most important part is how items are packed, “not necessarily how they are labeled.” UPS policy indicates a package should not leave an employee's hands until it's on a surface. The spokesperson said that policy applies to all packages, whether labeled fragile or not.

U.S.P.S statement instructed packages to be marked ‘fragile’ if they can break. The postal service also offers preferential handling for fragile items for an added fee, but that does not insure the item against damage. While a response from FedEx included a list of packing tips but no mention of fragile labels.

2720
Air-Tight Lab Bottles: Ensuring an Air-tight Seal Using PARAFILM


We are often asked if our lab bottles or screw cap test tubes are "air-tight". For these items to be air-tight they require a perfect seal around the top of the bottle or tube and the screw cap lid. Often the pouring ring or lid disc will do this, however we would still only consider the bottles or tubes as leak-proof rather than air-tight.Get more news about Airtight Bottle,you can vist our website!

A simple solution to creating an air-tight bottle or tube would be to seal the top with PARAFILM and then screw the lid down over the PARAFILM.

PARAFILM is a unique self-sealing, moldable and flexible film for numerous uses in the typical laboratory including electron microscope laboratories. PARAFILM has unique permeability properties, impressive water vapor transport properties, and is resistant to many common reagents. The thickness of all Parafilm products is 127µm.

2721
Make your own beautiful mosaic glass marble candle holder!



I don’t know about you, but I love to dim the lights in the evening and light a couple of candles to create the perfect relaxing ambiance for the end of my day. Don’t get me wrong, regular candles are great for this! However, there’s nothing quite like the added beauty of a mosaic candle holder to create a dazzling display of light dancing over the walls. And guess what?! You can make your own version at home in a snap! Here’s what you will need to get started…Get more news about Round Candle glass,you can vist our website!

The first step is to apply your flat glass marbles to the outside of your round candle holder using the hot glue. Starting from the top of your candle holder, apply the glass marbles all the way around the top edge, leaving a little bit of space in between your marbles.

When you finish with the top row of marbles, move down to the next row and start applying the glass marbles there. You want to align each marble in the 2nd row with the space between the marbles in the row above it so that the marbles are staggered.  When you reach the 3rd row, you will align the marbles up to the 1st row, and when you reach the 4th row, you will align those with the 2nd row…

This is the time to put on your gloves if you haven’t already. Than you want to smear the grout all over your project, making sure to really work it in between the marbles. Let it sit for around 20 minutes, then using a damp sponge, carefully wipe the grout off of the individual marbles.  This process is honestly the hardest part of the whole thing. It took me several sessions of drying and sponging to get the marbles looking nice and clear. It’s kind of like going to the beach and trying to rid yourself of every last piece of sand off afterwards…

This particular candle holder works really well with our small 4 oz soy candle tins or you can always use our soy tea light candles as well! Simply light and enjoy. I might also add that once the lights have been dimmed and the candle has been lit, this particular candle holder also pairs well with a glass of Merlot ?


2722
The Ultimate Guide to the Best Forex Candlestick Patterns



Both the hammer and the hanging man are probably the most basic, but at the same time, the most efficient candlestick patterns to trade Forex with if your goal is to jump in a trade when the market is about to reverse. That is why they belong to the category of one-candlestick reversal patterns. The hammer is the bullish pattern that appears at the bottom of the trend after a substantial price decline, whereas the hanging man is a bearish pattern that can be seen at the top of the uptrend. Both these patterns are tradable on any time frame higher than 15M.To get more news about TMGM, you can visit wikifx.com official website.
  The ability to recognize and trade off these patterns is invaluable for any successful Forex trader because they hint at the probable top, or the probable bottom, of a trend and signal that traders should start looking for the most optimal exit or entry points.
The hammer pattern emerges when a currency price drop substantially lower than the opening price of the day, but then the buyers step in and drive the price back to the level near the day‘s open, thus forming the one-candlestick pattern with a large lower wick (shadow), a relatively small real body at the absence, or a very small, upper wick. The color of the real body doesn’t bear much significance - it can be red (black) at the bottom of the downtrend or green (white) at the top of an uptrend. Certainly, a green body of a candlestick that flags the possible trend reversal might look more reassuring, but in reality, there have been many strong uptrends that stemmed from the hammer with the red body.
  It‘s important to know that the proper hammer pattern should have the lower wick at least twice as large as the candle’s real body; otherwise, that Forex candlestick pattern must be deemed as neutral. Also, remember that the real body of either a hammer or a hanging man must stay close or be within the upper (lower) price range.
  When this formation appears, traders say that the market is hammering out, and the reversal could be in the making. But the real essence of this candlestick pattern is best described by its Japanese name, “takuri”, which can be roughly translated as “testing the depth of the water by trying to reach for the bottom with a leg,” which makes a lot of sense when you look at its structure.
  The rule of thumb for using both these patterns is quite simple: the strength, or the reliability, of a hammer or a hanging man depends on the length of the lower wick, the size of the real body, and the presence of the absence of an upper wick and its size. The most meaningful patterns have a very long lower wick, small bodies, up to the point where they look like a dragonfly doji, and a very little or no upper wick.
  There is another hint regarding this pattern that we‘d like to share with you: when the hanging man appears at the presumed top of the uptrend, don’t rush into selling your position because the market is still running on the bullish steam, especially if the price movement is supported by the increasing volume, and there is a good chance that it would eat up the hanging man and continue pushing northward. Instead, wait for the next session to see whether the Forex market opens lower than the previous day‘s close. If that’s the case and the price drops with a considerable gap, the viability of the hanging man increases dramatically, and you can consider going short on that particular Forex pair.
  A shooting star and an inverted hammer are basically a hanging man and a hammer turned upside down that also act as the reversal patterns that emerge at the probable finale of a strong trending movement. The pattern is formed when the price of the particular Forex pair opens slightly above the close of the previous day, rallies strongly at first, but then gets pressurized by the sellers almost to the open of the trading session, thus forming the pattern with a long upper shadow, a small body, and little to no lower shadow. Please remember that the shooting star pattern can be considered as tradable only in trending markets, especially during powerful rallies, or at the top of the congestion zone. A shooting star and an inverted hammer in the ranging market has little to no significance with regard to forecasting the upcoming price movement.

2723
​Why Are 97% of Traders Knocked Down in the Forex Market?


Why will the vast majority of traders be kicked out of the forex market after trading for so long? The essential reasons for this situation are located in the inconsistency between trading rules and logic and insufficient implementation, resulting in long-term, continuous trading errors. Mistakes commonly made by traders are presented as follows:To get more news about trading strategy, you can visit wikifx.com official website.
  Chasing a surging market
  Please dont buy in because of a surging market, dramatic changes in which are indicative of numerous traps. The rational move for this is to observe the market, wait for a transient fall, and seize the opportunity to buy in.
  Chaotic logic of trading
  The trading mentality and behaviour should be continuous. The fixed logic should be relied on amid conducting the opening or closing, calculating profit points, and determining the timing of market entry or exit, thus making the behavior highly certain. Yet, it is hard for many traders to remain cool-headed, and they are prone to errors when failing to trade logically.
  Hesitation
  It is understandable that some traders prefer to add positions while others tend to stop losses in the face of mistakes in their trading. The thing is, hesitation is devastating. Please dont pin your hope of tiding over adversity on adding positions when you need to stop losses.
  As for staying in the market to trade as long as you can, it is essential for you to embark on rules and logic and strengthen implementation!
  Download WikiFX to get lessons from experts who have traded forex for over 20 years. (bit.ly/wikifxIN)


2724
US Dollar Outlook: USD Volatility to Rise with Fed Decision Due


The US Dollar had another uneventful session with the broader DXY Index little changed on Tuesday. General lack of direction for USD price action so far this week is likely due to high-impact event risk posed by the Fed announcement on tap for release tomorrow. The Federal Reserve will publish its interest rate decision Wednesday, 16 June at 18:00 GMT alongside updated economic projections and fresh dot plots from FOMC officials.To get more news about WikiFX, you can visit wikifx.com official website.
Since US Dollar outlook seemed tilted to the upside three weeks ago, we have seen the DXY Index stage a decent rebound to test the underbelly of its 50-day simple moving average. Perhaps the move is explained by traders unwinding their bearish bets and positioning for the risk of a hawkish shift in Fed policy.
  That said, potential shifts in the Fed dot plot and language around ‘substantial further progress’ will likely be major focal points for markets and where the US Dollar heads next. I suspect the odds are favorable for the Fed to announce the start of taper timeline discussions, which would stand to boost the US Dollar. The initial reaction could putter out, however, if Fed Chair Powell softens the blow with patient and confident rhetoric.
  This ‘rip-then-dip’ scenario for the US Dollar is supported by relatively muted overnight implied volatility readings. Similarly, FX options traders pricing in comparatively-low event risk for the Fed meeting points to the likelihood that the central bank will leave monetary policy largely unchanged. To that end, if the Federal Reserve opts to echo its transitory inflation narrative, there will likely be a bearish reaction by the US Dollar.




2725
5 Lessons Concluded from 3-year Trading Experience!



My name is Julia, a Russian trader. All my efforts spent in my three-year forex trading experience have ended up with failure. My lessons are summarized herein.To get more news about WikiFX, you can visit wikifx.com official website.
  1. Error in carrying out the contract entered into with a forex broker
  I was not aware of the account threshold for executing transactions and charges such as commissions at the beginning, thus failing to select a proper forex broker and spending a lot.
  Lessons are listed as follows:
  Read all terms and conditions carefully.
  Comparing terms and fees offered by different forex platforms.
  Be well-prepared through research and confirm the market and its direction.
  2. Lack of relevant knowledge and systems
  I didnt know how to execute my orders, selling out when hit by a fall and buying in when seeing a rise. Before long, I suffered a loss worth 20% of my capital.
  Lessons are presented as follows:
  Fully comprehend trading charts and understand the market.
  Pay attention to momentum indexes (MTM) amid interday trading.
  3. Changing trading systems too frequently
  I have tried at least 40 trading techniques and indicators, each of which was not used for more than a month.
  One lesson is concluded:
  Try all functions of a system at least within 4 to 8 weeks.
  4. Neglecting capital management
  Although I controlled my loss ratio, I didnt stipulate the number of trading losses in a day. In this case, my overall losses were heavy.
  Here are two lessons:
  Set the number of trades allowing to lose in a day.
  Dont breach your own capital management principles.
  5. Holding losing positions
  I became quite emotional because of losses, thus holding a transaction with the heaviest loss for nearly a week, which worsened the failure further.
  One lesson is listed:
  Stop-loss must be set.
  Download WikiFX to get lessons from experts who have traded forex for over 20 years. (bit.ly/wikifxIN)

2726
PTFX:Ponzi Scheme by IDS International: Some Ringleaders Are Arrested!


As we all know, countless illegal forex platforms engage in forex trading in disguise but pyramid schemes in fact. Traders are apt to be tempted by the fraudulently lucrative trading charts which are Ponzi schemes in essence.To get more news about Inflation, you can visit wikifx.com official website.
  IDS International was rammed into unavailable withdrawals in the wake of the meltdown and delayed withdrawals of PTFX, brutally locking margin calls for 8 days and exclusively allowing deposits. This forex platform has accumulated nearly 1.2 million dollar within a year or so!
  At present, some ringleaders involved have been arrested and sentenced, the news gladdening peoples hearts!Established in March 2019, the website was in a joint operation, a mode similar to that of PTFX. IDS International adopted the membership referral system in the beginning, activating membership by making deposits worth at least USD 1,000 on the heels of veteran member referrals, membership registration, and verification, which directly led to the relationship between old hands and novices equal to that between superior and subordinate.
  In the aftermath of PTFXs meltdown, IDS International restricted investors to withdrawals and profits. The broker even locked margin calls in a coercive manner right after an announcement, the content of which is presented as following:
  1. Transactions of all MT4 accounts submitted by members are ceased from December 19th,2019. No withdrawal is available.
  2. Trading profits arrive in the MT4 wallet of members after settlement on every Monday. Members can transfer, reinvest and withdraw these as usual (whereas the last operation can be conducted but never successful).
  As for the above-mentioned content, the excuse made by IDS International was that the trading tactics and points of profit-gaining boasted by its clients could be impacted.
  IDS International saw its membership surging to 31,354 just within the period from March 20th, 2019 to March 20th, 2020. The amounts of deposits had totaled around 1.2 million dollar by March last year.
Li Zong (escaped criminal from Singapore), in league with Huang Youhui (escaped criminal from Malaysia) and Chen Junhao (escaped criminal from Malaysia), recruited 15 core members in January 2019, including Ji, Yan, Tang, Guo, Tong and Xu. The website and APP of IDS International, funded by Li Zong, was developed and finally launched in use on January 16th, 2019.
  The membership referral system on the online platform of IDS International was indicative of being active members by making a certain amount of deposits following veteran member referrals, membership registration, and verification. The process was passed on and repeated in IDS International. Naturally, novices, registered as members, were subordinate to veterans who lured them to the platform, which constructed the hierarchical relationship. This was divided into 8 ranks based on the number of members recommended and the amounts of deposits, which were listed from high to low as OIB, SIB, DIB, PIB, MIB, IB, TR, and MEMBER, or general membership.
The Court took the view that culprits, including Li Zong, Huang Youhui and Chen Junhao, conducted the fraudulent dissemination in forms of online lectures, offline investment fairs and stuff, taking the Internet as a vehicle and the forex trusteeship as a gimmick. They claimed that at least 7% of monthly returns could be enjoyed as long as deposits were made while more investment one made and more subordinates he/she developed, higher profits he/she would embrace, ramping up members through registration after referrals and setting up the dynamic reward system for rebates, such as trading commission, contract commission, level bonus, and profit bonus, based on the number of members directly or indirectly recommended to the platform. Therefore, IDS International was deemed to have wantonly reaped profits by multi-level marketing in the manner of profiting from beginners.
  Five defendants as aforementioned in this pyramid scheme gang jointly or partially shouldered responsibilities of management, dissemination, promotion, training and the others, having convened relevant activities with the capacity of over 30 gang members and ranked among the top 3 levels. As a result, their wrongdoing constituted the crime of organizing and leading pyramid selling activities. The public prosecution organ charged the accused with the clear facts of organizing and leading pyramid selling activities, and the irrefutable and sufficient evidence, finding them guilty on all charges.


2727
Unforgivable Sinner! Tradixa!!

I live in Athens, Greece. I married and with 4 children and as an artist musician. But me and my wife we lost all our incomes since last February 2020.To get more news about Gold Price, you can visit wikifx.com official website.
  I'd like to let you know about my tragic experience with a scam broker - Tradixa!!
  It was after the middle of September 2020 that I started with them with the minimum deposit of 250€ with bonus 100€. After some days with the help of my account manager Dionisis Zervas I've made some profits and I asked him if I could take some of them to see how it works. He answered no, because I had made these profits trading in a higher level than my account and I had to deposit more money to became silver, gold, platinum, diamond or VIP member, so then I could made a withdraw..! So I made a higher deposit of 1500€and they gave me bonus 1500€. As I made profits they told me that in a few days will starts a project for two months with two stocks Amazon and Alibaba and after two months, about half of January 2021 could give a 10-12% profit as every year.
So on the beginning of November 2020, I had gave them 40000€ and got 25000€ bonus and about the middle of November I gave them another 40000€ (with 30000€ bonus) and the whole amount was 80000€ (without the bonus). When I made the last deposit they told me that in that project with Amazon and Allibaba I had to pay swaps (they had never mention about that before) and if I want to be free of them I had to put 20000€ (total 100000€) to be in a Diamond account. I told them that I didn't have more money and they told me that they could help me putting 10000€ for me and I had to put only 10000€. But I didn't have more money and the swaps increase day by day..!
  At the same time started some calls from UK and Cyprus from companies TIMARKETS and GEVERESTFX and some others but I don't remember their names. These companies told me that they want to help me take back my money from the fraud/scam company Tradixa. How did they knew about that? Maybe they are the same people..! They insist and precure me hard for many days!
It was the first time that I understood that something went wrong... I asked Tradixa to give me back my money from the first day of the deposit of the last 40000€ but they told me about the 30000€ bonus they had put in my account and they couldn't withdraw, only if I gave them another 20000€ and became in Diamond account I could whenever I want to make the withdraw.
  With hard precure according to my laywer advice by phone, emails and messages in WhatsApp, my account manager Dionisis Zervas (if it's true) left me and another account manager called Angeliki Anastasatou (if it's true..!?) started talking with me. We argued many times and she told me that since 15th of January 2021 I could made the withdrawal for about 100000€. She told me that I had to pay about 10000€ for taxes, but I told her that I don't have and she had to keep the tax from my account.
  Since then nobody call me despite my email and phone calls to their phone center. The lady in the phone told me each time: Sorry for the inconvenience and as soon as possible a representative will call you back, or your account manager.
Now I'm trying not to think about it very much me and my wife, because we have 4 children and they needs us well! We lose everything! My lawyer is working on it but I feel that it is useless..! What Tradixa did to me and my family is unforgivable!
  By checking WikiFX App, we can see that the broker is only scored 1.27. This broker is registered in UK, and currently has no valid regulatory. Please be aware of the risk!

2728
Bitcoin (BTC/USD) Breaches, Reclaims $30k in a Wild Day for Crypto


Bitcoin (BTC/USD) prices have returned to February 2021 lows as China continues to clamp down on the cryptocurrency space. After falling below the key psychological level of $30,000, Bitcoin (BTC/USD) bulls have managed to regain control over price action whilst honoring support and resistance structure, with todays low printing right around the Jan 22 swing low of $28,800.To get more news about WikiFX, you can visit wikifx.com official website.
  Bitcoin (BTC/USD) Technical Analysis
  After reaching its peak on 14 April 2021, an influx of bears, driven by both regulatory and environmental concerns, helped to push the major cryptocurrency back to the psychological level of $30,000. A similarly contentious test showed in mid-May, but buyers were able to jump in and re-take control above the 30k marker ($30,066, to be exact). This morning saw no such fortune for bulls, as Bitcoin temporarily breached the 30k level and fell all the way down towards that prior swing low of $28,800 before starting to recover.
  Since the announcement of Bitcoin as a form of payment for Tesla vehicles in February 2021, the institutional adoption of major cryptocurrency supported the strong rally which saw prices rising above $65k. However, after the Bitcoin reversal by Tesla/Musk (due to the high energy consumption of Bitcoin mining), a massive re-pricing has been underway and BTC/USD has retreated back to early 2021 levels.
Meanwhile, from a short-term perspective, the downward pressure on price action was confirmed with a rise in the ATR, the technical indicator often used as confirmation of a sharp move. With a MACD crossover occurring below the zero line, the probability of a move higher cannot be ruled out.
  With that being said, current support remains at a big area on the long-term Bitcoin chart, hovering around that 30k level that‘s held multiple inflections over the past five months. On a shorter-term basis, there’s Fibonacci support around $32,076 (February low) with the next level of support residing at the psychological level of $30,000.
  Meanwhile, current resistance holds at the 88.6% retracement of the Jan 22 – April 14 major move, coming in at at $32,194, after which another Fibonacci retracement rests at $34,415. The next big level beyond that is the $35,000 psychological level.

2729
Metal parts manufacturer offers stamping expertise


Matritech prides itself on being a one-stop shop for metal parts manufacturing. The Drummondville, Que.-based company combines several manufacturing processes under the same roof, enabling it to essentially operate as the metal fabrication division of its customers’ companies. Among its capabilities, Matritech offers expert stamping and pressing services.To get more news about Stamping steel parts, you can visit tenral.com official website.

Equipment and expertise

Matritech’s facility features a range of mechanical presses with capacities up to 500 tons and a variety of table dimensions. This machinery, and the expertise of the operators, enables the company to perform two types of stamping procedures, both of which can be done from blank parts or with metal coils to ensure high-volume production. The first type is a transformation procedure that forms flat metal with the help of dies, while the second type is a manufacturing technique in which the company forms an object that cannot be unbent from a thin piece of sheet metal.

The Matritech advantage

There are several benefits to working with Matritech. Because its machines have large capacities and tables, the company can easily transition to high-volume production runs. And, for projects that require the use of the company’s multiple services — like cutting, bending and high-volume stamping, for example — transitioning between the two is easy because the records of the parts and quality criteria have already been coded. This helps to lower costs by reducing labour time.

Additional offerings

In addition to stamping and pressing, Matritech offers cutting, welding, machining, bending, assembling and tool making services, as well as painting, plating and passivation. This one-stop shop offering results in lower costs, simplified manufacturing and improved product quality.

2730
Beginner’s Guide to App Store Optimization



There are millions of apps out there on the major app stores — 2 million on Apple's App Store and 2.2 million on Google Play, to be precise — and most of them never even get the chance to be seen by a large audience. In fact, less than 0.01% of consumer mobile apps will be considered a financial success.To get more news about Google Play App Keyword Ranking Service, you can visit aso700.com official website.

The truth is, many of these “failed” apps are actually quite good! If you search for a genre like “productivity” and scroll down to see the apps that don’t rank well, you’ll find that many of them solve the problem in an interesting way.

Yet somehow a handful of new app developers are able to “break through the noise,” get their mobile application to the top of the app store rankings, and rake in the cash. For example, Boom Beach (a gaming app) made upwards of $2 million in a single month.Clearly, getting discovered is a huge key to make your app go viral, while others get buried in the search results, but how do you do this? Well, one of the most important strategies for getting your app to rank high is app store optimization (ASO).

According to Apptentive, more apps are discovered through the app store than any other channel:App store optimization is almost like SEO for apps. Just as search engine optimization allows your site to get more visitors and reach more potential customers by ranking higher in the SERPs, app store optimization helps you reach more potential users by ranking higher in the app store.

Optimizing your app store requires a deep understanding of your target market. By understanding which keywords they are using, you can start optimizing your app for those specific keyword search results. This is the most important mobile app element you can pursue because discovery through app store search is what results in the majority of installs.

But most app store publishers aren’t investing in ASO, which makes the opportunity even greater for those who are. It’s an easy, low-cost way to compete with brands and developers who have large advertising budgets.

In this post, I’ll show you how exactly ASO works, and how you can leverage it to your advantage.When it comes to SEO, you’ve got a variety of factors that contribute to how well your page ranks, like how many backlinks you have or how well your tags are optimized. Similarly, there are a set of factors that influence how well your app ranks in the app store. Here are some of them:

Keywords are the words that your target audience uses to search for apps and products similar to the one(s) you offer.

According to Trademob, you should first use tools like Google Keyword Planner and Google trends to get a good sense of the general idea of the keyword and related searches. Then you can move on to app data and insights tools like SensorTower or App Annie, which provide information and a more comprehensive understanding about keyword search suggestions for apps, as well as the keywords that your competitors are using.

For example, App Annie is used by 94% of the top 100 app publishers. When it comes to ASO, they have a specific section dedicated to keyword discovery where you can see any app’s top ranking keywords.

Sivuja: 1 ... 180 181 [182] 183 184